ARDA AAC BLOCK ADHESIVE is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light weight concrete, ﬂy ash bricks, cement hollow blocks, cellular concrete blocks or smoothing over the block work surface in layers of up to 12 mm thickness, that meet and exceed the requirements of National and International Standards.
High Bond Strength.
No Shrinkage Cracks.
High Thermal Insulation.
No Curing Required.
Long working time.
No curing required after block work is done.
Improved adhesion between two blocks .
Fast & economical.
AREA OF APPLICATION : For interior and exterior use for preparing thin bed block mortar for ALC and cellular concrete blocks.
USES : The surfaces on which the block work has to be done shall be sound and conﬁrm to good design, rigid, clean and free of dirt, oil, grease, curing compounds, for release agents or loose plaster and paint For economy the surfaces should be level and true within.